KA46CXA12001
CX 1200W Monoblock Class D Subwoofer Amplifier
The CXA1200.1 Mono Amplifier is built for affordable power and performance, thanks to an optimized circuit layout and the high-grade internal components.
This mono CX-Series Amp is now one-ohm stable, giving you even more wiring options for your system! Using a Class-D power plant, the CXA1200.1 features a variable bass boost with KickEQ, giving you as much as a 6dB of extra bump with a simple turn of the optional CXARC Remote Bass Controller. A powerful 12dB crossover and 24dB subsonic filter is included, letting you quickly tune your system to perfection.
CX-Series Amplifiers accept up to 40 volts (400 watts) of speaker-level input signal. This kind of flexibility both makes line-out converters unnecessary and optimizes your sound quality at the same time!
Use the full-range outputs to expand your system with other bass amps, or add a full-range amp to complete your system.
Features:
- Efficient Class-D amplifier
- Three-second turn-on/off delay to eliminate unwanted interference
- Variable 12dB crossovers provides control to dial in perfect sound
- KickEQ™ 6dB variable bass boost for those additional low frequencies
- 24dB subsonic filter for protection from potentially damaging frequencies
- FIT+™ (Fail-safe Integration Technology-PLUS) means it works with nearly every radio
- Accepts up to 40-volt input signal
- Small footprint for easier installation
- Compatible with CXARC Remote Bass Control
- Vertical mounting hardware included for another unique look
Spec:
RMS Power
- 14.4V 4 Ohm mono = 1% THD+N : 600 W x 1
- 14.4V 2 Ohm mono = 1% THD+N : 1200 W x 1
- 14.4V 1 Ohm mono = 1% THD+N : 1200 W x 1 +/-10%
- Length - 12" (30.6 cm)
- Height - 2 3/8" (5.9 cm)
- Width - 6 3/4" (17 cm)
- Frequency Response - 25-200 Hz (+/- 1 dB)
- Signal-to-Noise Ratio - >95dB A-weighted, re: rated power
- Input Sensitivity Low Level - 250mV-10V
- Input Sensitivity High Level - 1V-40V
- Active Crossover - 50-200 Hz, 12dB/octave low pass only
- Subsonic Filter - 25 Hz, 24dB/octave
- KickEQ Boost - variable 0-6dB, centred at 40 Hz
We Also Recommend
Customer Reviews
There are so many great reviews of this amp, and I can certainly say first hand this amp is just awesome .. Clean power you can hear and feel .. I have it playing an old JBL gt 10"dvc rated at 400 RMS .. Noticeable difference over the 1000 watt mono MB Quart amp I replaced, plus in a way smaller package ..No noticeable heat, truly value for money ..
Bought this amp to power my 2 12� kicker subwoofers. The quality of this thing is amazing and the size is perfect. You can�t get this much power from another amp this size. I was able to install it under the seat of my Jeep Wrangler. Sound quality is 10 out of 10!
I absolutely love this amp I wish I bought it sooner. It comes with a birth certificate and is tested and rated true power mine puts out 1237 watts and it�s clean power. The amp draws 100 amps of current itself you�re probably gonna need a big 3 upgrade to power this amp properly. I will say I�ve had other amps that produced the same power but also drew 150 to 200 amps of current which is a huge amount. I have this amp powering 1 harmony audio 12� monolith and it hits hard and deep notes with this amp. My sub is 1500 watts rms and this amp makes my one sub louder than 2 other brand 12�s . It handles 1 and 2 ohm loads. I will say I have my gain about 3/4 and my kickeq (bass knob) about half way and after following the tuning chart with my volt meter and it only puts out minimal heat. There�s a million amps on the market but I learned my lesson stick with the best. If you�re build is on a budget do yourself a favor and spend the little extra on this amp you won�t regret it. I�ve bought many amps over the years and I always end up with a kicker amp and an alpine source unit. The money you save initially on other brands don�t last long term.
Value For Money And Functionality Worth It.Amp Quality And Fit Also Great. Bass Control And Distortion.
Good product�work well